Guangzhou Yuejia Environmental Protection Technology Co

When working safely, there is no high voltage in all accessible places of the discharge tube.
The stable power supply uses open adjustable belt protection, and the discharge tube adopts the latest sunflower heat sink cooling technology. The temperature rise is low during long-term operation, the attenuation of ozone concentration is less than 1,000, and the service life can be more than 10 years.
Technical parameters
Product model
Working voltage/other voltages need to be customized in advance
Power consumption (adjustable)
High voltage output
High voltage frequency (adjustable)
Ozone tube size**
High voltage power supply size**
Cooling method air cooling
Use air source air/oxygen
_!! Maximum ozone production/(oxygen flow rate /)
Maximum ozone concentration/(use oxygen flow rate/)
Use gas source oxygen, or air/.
Maximum ozone concentration/(oxygen/hour)
Maximum ozone production (oxygen flow/hour)
The working environment requires an ambient humidity of less than 0.0, an ambient temperature of less than 100 degrees Celsius, a dry, clean and well-ventilated environment.
Weight. About installation The wiring terminals on the ozone tube heat sink will do.
The ozone tube nozzle does not distinguish between air inlet or outlet, which side can inlet or outlet
The ozone tube material and process safety design, European and American export standards! The dielectric material is made of high-purity quartz material, with high precision and uniform discharge. Stainless steel internal electrode and fasteners, PTFE gas nozzle, anti-corrosion high-purity fluorine rubber ring seal, external electrode material is aluminum alloy, appearance shape The company has applied for a patent.
Note that the internal adjustments on the circuit board have been debugged before leaving the factory. Do not adjust or change them at will, otherwise it will affect the normal operation of the product. Turn the potentiometer clockwise to increase the power, and turn it counterclockwise to decrease the power.

Recommendation
If the buyer has no previous experience in installing machines or the experience is not sufficient, after installing the accessories, take a photo to the shop owner to confirm whether it is installed correctly to avoid installation errors. Errors cause product damage and cause you losses.
Finally, buyers are reminded that the generator needs to dissipate heat, and a fan must be used to dissipate heat when it is working. There is high voltage when the generator is working, so do not touch it. It should be installed inside the chassis to prevent high-voltage electric shock.
Shipping Instructions
We will package and ship the goods after the buyer takes the picture and confirms it after many tests. When leaving the factory, the internal adjustment of the power supply has been fully debugged and all parameters have reached Best performance value. Buyers should not adjust the internal adjustability easily.
The external potentiometer can be adjusted arbitrarily after the equipment is installed. Adjust it clockwise until the maximum ozone production is the maximum value, and vice versa, the smaller it is.
Power Instructions
(Please refer to it when an abnormality occurs in the accessory)

(The accessory has been fully prepared when leaving the factory, please do not operate it if there is no abnormality
)
/> Please read the markings on the circuit board clearly for the adjustment steps.
Turn counterclockwise to the minimum, and then adjust to the required power. When adjusting, the external potentiometer should be adjusted clockwise to the maximum. The main function is to stabilize the set power. When the load capacitance changes (such as short circuit or open circuit), the set power will be stabilized according to the changing current.
After obtaining the required power, adjust clockwise to make the current Just drop ~.
Adjustment can change the discharge frequency of the generator. The required frequency can be adjusted according to different ozone generators. Adjust clockwise to increase the frequency. Counterclockwise to decrease the frequency. Frequency range~.< br/> It is the load current limit of the ozone generator. If the voltage of the power grid is too high, the load current is too large or there is a short circuit, this function will turn off the power supply and an audible and visual alarm will appear at the same time. Clockwise to enhance the output protection current, counterclockwise In order to reduce the output protection current.
Welcome to consult Deng Zhiren
Taisheng Technology
specializes in R&D and production of various ozone generators, and develops various high-voltage and high-frequency power supplies and digital controllers.